Skip to product information
1 of 2

Kanto Camera

4SR44(4LR44) Adapter

4SR44(4LR44) Adapter

Regular price 2,200 円
Regular price Sale price 2,200 円
Special Price Contact us

Please click here to see about "Japan's Consumption Tax" and "Taxes for International Deliveries"


The solution for discontinued 4SR44 (4LR44) batteries. Reusable adapter, simply change the batteries.

The adapter is the same size as the original 4SR44 (4LR44) battery.
Can be used as a substitute for 4G13, 544, and PX28.

Compatible batteries: 4 pieces Silver Oxide SR44 (Equivalent: SR44W, SR44SW, 357) and 4 pieces Alkaline LR44 (Equivalent: A76, AG13) 

Suitable Models: Cameras takes 4SR44 (4LR44) batteries.

Click here to find the suitable adapter you need.

Note :
●Battery is not included.
●Suitable for Large Currant
●This adapter doesn't reduce the battery voltage.

Please read and understand the following before ordering

●Some models may have unexpected limitations. Take test shots with the adapter before actual shooting. Please note that we are not responsible for any issues that arise from using the adapter while shooting.

●Old products may have poor contact due to weak spring or erosion on battery contact. Please also note that there is a possibility of short circuit depending on the shape of the battery contacts.

●Some models require a contact in the battery chamber to be modified in order to use a battery adapter. Please check the list of the suitable adapters.

●Even if you use a suitable adapter and battery, the adapter may not work if the camera or light meter is defective. Please note that we do not accept returns.

●The voltage of silver batteries (SR) hardly changes with the remaining battery charge, while the voltage of alkaline batteries (LR) decreases as the remaining battery charge becomes low. Alkaline batteries are not suitable for use in models with a match-needle light meter. Alkaline batteries are prone to leakage, so be sure to remove them when the camera or light meter is not in use.

●In order to reduce the voltage with the adapter, it needs to be installed with a battery in a camera or a light meter, and a current has to flow. Just measuring with a digital tester cannot get the reduction. 

●The voltage conversion value is based on measurements at ordinary temperature and under normal shooting conditions.

View full details