Shutter Ring Plate for Hasselblad Planar 80/2.8C

---

Please click here to see about "Japan's Consumption Tax" and "Taxes for International Deliveries"

---

We have reproduced shutter ring plates for Hasselblad Planar 80/2.8C lenses to replace ones with faded numbers as shown in the photo below.
We also sell them as spare parts as they can be replaced relatively easily by users.

Please be sure to read the following notes before placing an order. If you have any concerns about replacing the part by yourself, we recommend that you contact us for a replacement service.

Notes on Replacement
*First, carefully remove the shutter ring plate from the lens. Be careful not to lose the screws when removing the plate. The plate may act like a spring and the screws may fly out if you do it without care, so please be very careful when removing the plate. Replacement screws are not available.

*Remove the protective film from the top surface of the shutter ring plate before replacing the ring.

*The position of the numbers may vary from lens to lens, so please adjust the position when installing it on the lens. The distance between the numbers is almost the same.

If you would like us to replace your shutter ring plate, please contact us using the contact form.